iRIS 350FXiRIS 350FXiRIS 350FXiRIS 350FX
iRIS 350FX

iRIS 350FX IP multi-channel Datalogger

Request a quote or adviceAdded to Request List

HyQuest Solutions’ IP datalogger iRIS 350FX has been designed and constructed for use in harsh outdoor and industrial environments. It is compact, cost effective and easily configured, with support for a wide range of instrumentation. The communication slots…  Read more

Brochure
Digital Input/Output
  • 4 x digital I/O channels (configurable) 
  • Inputs: clean contact to 0 V or 3.6-12 V DC referenced to GND
  • Outputs: switched 12 V or open-drain sinking to 0 V, both limited to 100 mA
Analogue Input/Output
  • 4 analogue Inputs: uni-polar, 16 bit resolution, 30 V DC surge-protection
  • Input ranges: 0-1.25 V, 0-2.5 V and 0-5 V
  • Internal 100 Ω sink resistors allow use of input current (0/4-20 mA). 
  • 1 analogue (excitation) output for energizing passive instruments (e.g. potentiometer type wind vanes) or alternatively for sending a derived analogue signal to other equipment, selectable as 0-5 V or 4-20 mA
Communications
  • Non-isolated DTE RS232 at 1200-115200 bps (default 38400 bps)
  • Wireless 3G modem or a custom comms module on PCB Rev 1.2+ 
  • SDI12 instrumentation port, complies with SDI12 V1.3
  • Serial VGA camera proprietary connection (3.3 V CMOS levels)
Power Supply
  • Internal/external 12 V rechargeable SLA battery, integral charger 15-30 V DC input, optional: solar panel (easily pluggable without additional regulator)
  • Lowest power mode current 3 mA
  • Over voltage and reverse polarity protected with self-resetting fuse
  • Voltage of battery and charger input: monitored, logged, displayed, alarmed
Data Storage: Flash Memory
  • Total 16 MB, of which 8 MB allocated to logged data/stored images (1,084,576 samples), or audio file storage for up to two languages (iRIS 350FXV only) 
  • Typical autonomy: 2 parameters logged every 15 minutes and battery voltage logged hourly will give almost 12 years of storage.
Status LEDs
  • 1 tri-colour LED for overall operational state
  • 8 LEDs for status of communication devices (I/O status and communication activity)
Real-time Clock / Calendar
  • High accuracy, backed by on-board lithium battery to prevent loss of date/time
Environmental Conditions
  • Enclosure: IP67, die-cast aluminium alloy, hard grey paint finish, neoprene gasket
  • Operating temperature: 14 ˚F to +158 ˚F (-10 ˚C to +70 ˚C)
  • Storage temperature: -22 ˚F to +185 ˚F (-30 ˚C to +85 ˚C)
Size (WxHxD) and Mass
  • 6.29 in x 5.11 in x 2.75 in (160 x 130 x 70 mm); 2.86 lb (1.3 kg) incl. internal SLA battery
Conformity / Compliance
  •  RoHS, FCC, CE (WEEE pending)

  • Alt

    datasphere

    …
  • Alt

    iLink

    …
  • Alt

    HydroTel - Telemetry System

    …

HyQuest Solutions’ IP datalogger iRIS 350FX has been designed and constructed for use in harsh outdoor and industrial environments. It is compact, cost effective and easily configured, with support for a wide range of instrumentation. The communication slots support wireless 3G modem, Iridium satellite, ethernet, RS232, SDI-12 and modbus slave protocol for SCADA. An integral wireless modem provides network connectivtiy.

Configuration & Data Download

iRIS 350FX is configured locally via RS232 connection using HyQuest Solutions' free-of-charge iLink software (Windows, Android). iLink is used to configure and check monitored values and to download data from the iRIS 350FX. The optional HydroTel™ telemetry software can be used for remote configuration and downloading.

Options for data access / download

  • Direct RS232 connection e.g. laptop, data radio or bluetooth adaptor
  • FTP file transfer (up to 2 pre-configured locations)
  • IP based packet transfer (TCP/UDP)
  • SMS text back (current sensor values)
  • Voice annunciation (iRIS 350FXV only)

  • Aluminium die-cast housing
  • IP67
  • Low power consumption, battery operated, solar chargeable (optional solar panel available)
  • Up to 20 virtual sensors
  • 40 alarms that can be assigned to any virtual sensor
  • Non-volatile memory
  • Security: Configurable with a pincode to prevent unauthorized access to information
  • Small graphics LCD display and 4 button keypad for viewing general and sensor information, running totals, etc

The iRIS 350FX is especially suitable for 

  • Data Acquisition
  • Hydrometric Stations
  • Automatic Weather Stations
  • Environmental Monitoring
  • Agrometeorological Monitoring